ALLOY SCREW PIN ANCHOR SHACKLE
SAFETY FACTOR: 5:1
Finish: BODY-HOT DIP GALVANIZED., PIN-BLACK
Alloy Shackles are designed with a 5:1 safety factor and have a strength rating of approximately 50% higher than a comparable-sized carbon shackle.
- Working load limit and traceability codes shown as permanent markings on body
- All shackles have alloy quenched and tempered pins
SPECIFICATIONS
| PART NO. | Nominal Size (in) | Working Load Limit (t) | DIMENSIONS(IN.) | Weight (lbs) | ||||||||||
| A | B | C | D | E | F | G | H | L | M | P | ||||
| 31600 | 1/4″ | 3/4 | 0.49 | 0.31 | 1.14 | 0.25 | 0.75 | 0.70 | 1.25 | 1.94 | 0.13 | 1.56 | 0.25 | 0.12 |
| 31601 | 5/16″ | 1 1/4 | 0.53 | 0.38 | 1.23 | 0.32 | 0.80 | 0.83 | 1.44 | 2.13 | 0.18 | 1.75 | 0.31 | 0.18 |
| 31602 | 3/8″ | 2 | 0.66 | 0.44 | 1.44 | 0.38 | 1.03 | 0.91 | 1.78 | 2.49 | 0.25 | 2.03 | 0.38 | 0.31 |
| 31603 | 1/2″ | 3 1/3 | 0.81 | 0.63 | 1.88 | 0.50 | 1.31 | 1.19 | 2.31 | 3.28 | 0.38 | 2.69 | 0.50 | 0.63 |
| 31604 | 5/8″ | 5 | 1.06 | 0.75 | 2.38 | 0.63 | 1.69 | 1.50 | 2.94 | 4.19 | 0.44 | 3.34 | 0.69 | 1.38 |
| 31605 | 3/4″ | 7 | 1.25 | 0.88 | 2.81 | 0.75 | 2.00 | 1.81 | 3.50 | 4.97 | 0.50 | 3.97 | 0.81 | 2.25 |
| 31606 | 7/8″ | 9 1/2 | 1.44 | 1.00 | 3.31 | 0.88 | 2.28 | 2.09 | 4.03 | 5.83 | 0.50 | 4.50 | 0.97 | 3.38 |
| 31607 | 1″ | 12 1/2 | 1.69 | 1.13 | 3.75 | 1.00 | 2.69 | 2.38 | 4.69 | 6.56 | 0.56 | 5.07 | 1.06 | 5.32 |
| 31608 | 1 1/4″ | 18 | 2.03 | 1.38 | 4.69 | 1.29 | 3.25 | 3.00 | 5.75 | 8.25 | 0.69 | 6.16 | 1.38 | 9.50 |
| 31609 | 1 1/2″ | 25 | 2.38 | 1.63 | 5.75 | 1.54 | 3.88 | 3.63 | 6.88 | 10.00 | 0.81 | 7.35 | 1.62 | 17.20 |
PART NO. : 31100-shackles
PART NO. : 32120
PART NO. : 32215
PART NO. : 312XX