|
[ Winches/Bars/Tracks ] [ Winch Straps ] [ Ratchet Straps ] [ Transport Chain/Connectors ] [ Corner Protectors ]
¡@
Breaking Strength (B/S) = 3 X Working
Load Limit (WLL)
Alternate hardware available, see hardware
section of catalogue
Webbing straps must be protected when used on
rough or sharp objects. Straps that are cut, worn or otherwise damaged
should not be used.
A strap is only as strong as its weakest
component.
¡@
| |
Winch Straps

All winch straps are made with heavy duty, wear and
weather-resistant load control straps, dependable hardware to meet the demanding
conditions of flatbed operations. All winch straps are labeled to meet DOT
regulations and WSTDA recommended.
- Alternate hardware and custom lengths are available upon
requested.
- These straps are made from minimum breaking strength of
6,000lbs per inch polyester webbing.
WARNING
- Breaking Strength (B/S) = 3 X
Working Load Limit (W.L.L)
- Do not use strap if there are any signs
of cut webbing, heat or chemical damage.
- Do not attempt to use strap above rated
capacity.
- Alternate hardware available, see
hardware section of catalogue
- Webbing straps must be protected
when used on rough or sharp objects. Straps that are cut, worn or otherwise
damaged should not be used.
- A strap is only as strong as its
weakest component.
NOTE
- Hardware strength may be reduced if load path in the area
of hardware is not in a straight line.
- Working load requirements should be evaluated by user
before selecting appropriate hardware and strap assemblies.
- Remember, All strap assemblies or systems
are as strong as their weakest component including the point of attachment.
2" Winch Straps, webbing b/s:
12,000lbs
 |
2" Winch Strap w/-38162 chain anchor
Working Load Limit: 3,335lbs
(1,515kgs)
B/S: 10,000lbs
(4,545kgs) |
| Part No. |
Strap Length |
| WS216-C |
16FT |
| WS220-C |
20FT |
| WS225-C |
25FT |
| WS230-C |
30FT |
|
 |
2" Winch Strap w/-18512 delta ring
Working Load Limit: 3,335lbs
(1,515kgs)
B/S: 10,000lbs
(4,545kgs) |
| Part No. |
Strap Length |
| WS216-D |
16FT |
| WS220-D |
20FT |
| WS225-D |
25FT |
| WS230-D |
30FT |
|
 |
2" Winch Strap w/-18300 flat hook
Working Load Limit: 3,335lbs
(1,515kgs)
B/S: 10,000lbs
(4,545kgs) |
| Part No. |
Strap Length |
| WS216-F |
16FT |
| WS220-F |
20FT |
| WS225-F |
25FT |
| WS230-F |
30FT |
|
 |
2" Winch Strap w/-18420 twisted snap
hook Working Load Limit: 3,335lbs
(1,515kgs)
B/S: 10,000lbs
(4,545kgs) |
| Part No. |
Strap Length |
| WS216-TS |
16FT |
| WS220-TS |
20FT |
| WS225-TS |
25FT |
| WS230-TS |
30FT |
|
 |
2" Winch Strap w/-18200 wire hook
(7/16") Working Load Limit: 3,335lbs
(1,515kgs)
B/S: 10,000lbs
(4,545kgs) |
| Part No. |
Strap Length |
| WS216-W |
16FT |
| WS220-W |
20FT |
| WS225-W |
25FT |
| WS230-W |
30FT |
|
 |
2" Winch Strap w/-18202 wire hook
(3/8") Working Load Limit: 1,666lbs
(757kgs)
B/S: 5,000lbs
(2,272kgs) |
| Part No. |
Strap Length |
| WS216-W3 |
16FT |
| WS220-W3 |
20FT |
| WS225-W3 |
25FT |
| WS230-W3 |
30FT |
|
¡@
¡@
3" Winch Straps, webbing b/s: 18,000lbs
 |
3" Winch Strap w/-38613 chain anchor
(3/8") Working Load Limit: 6,000lbs
(2,727kgs)
B/S: 18,000lbs
(8,181kgs) |
| Part No. |
Strap Length |
| WS316-C |
16FT |
| WS320-C |
20FT |
| WS325-C |
25FT |
| WS330-C |
30FT |
|
 |
3" Winch Strap w/-38165-5 chain anchor
(5/16") Working Load Limit: 5,400lbs
(2,454kgs)
B/S: 16,200lbs
(7,363kgs) |
| Part No. |
Strap Length |
| WS316-CS |
16FT |
| WS320-CS |
20FT |
| WS325-CS |
25FT |
| WS330-CS |
30FT |
|
 |
3" Winch Strap w/-18440 flat hook
Working Load Limit: 5,000lbs
(2,272kgs)
B/S: 15,000lbs
(6,818kgs) |
| Part No. |
Strap Length |
| WS316-F |
16FT |
| WS320-F |
20FT |
| WS325-F |
25FT |
| WS330-F |
30FT |
|
 |
3" Winch Strap w/-18201 wire hook
(1/2") Working Load Limit: 5,000lbs
(2,272kgs)
B/S: 15,000lbs
(6,818kgs) |
| Part No. |
Strap Length |
| WS316-W |
16FT |
| WS320-W |
20FT |
| WS325-W |
25FT |
| WS330-W |
30FT |
|
 |
3" Winch Strap w/-18513 D ring
Working Load Limit: 6,000lbs
(2,727kgs)
B/S: 18,000lbs
(8,181kgs) |
| Part No. |
Strap Length |
| WS316-D |
16FT |
| WS320-D |
20FT |
| WS325-D |
25FT |
| WS330-D |
30FT |
|
¡@
¡@
4" Winch Straps, webbing b/s: 24,000lbs
 |
4" Winch
Strap w/-38614 chain anchor (3/8") Working Load Limit:
6,600lbs
(3,000kgs)
B/S: 20,000lbs
(9,090kgs) |
| Part No. |
Strap Length |
| WS416-C |
16FT |
| WS420-C |
20FT |
| WS425-C |
25FT |
| WS430-C |
30FT |
|
 |
4" Winch
Strap w/-18614 delta ring Working Load Limit:
6,600lbs
(3,000kgs)
B/S: 20,000lbs
(9,090kgs) |
| Part No. |
Strap Length |
| WS416-D |
16FT |
| WS420-D |
20FT |
| WS425-D |
25FT |
| WS430-D |
30FT |
|
 |
4" Winch
Strap w/-18310 flat hook
Working Load Limit: 5,500lbs
(2,500kgs)
B/S: 16,500lbs
(7,500kgs) |
| Part No. |
Strap Length |
| WS416-F |
16FT |
| WS420-F |
20FT |
| WS425-F |
25FT |
| WS430-F |
30FT |
|
 |
4" Winch
Strap w/-18100 wire hook Working Load Limit:
6,600lbs
(3,000kgs)
B/S: 20,000lbs
(9,090kgs) |
| Part No. |
Strap Length |
| WS416-W |
16FT |
| WS420-W |
20FT |
| WS425-W |
25FT |
| WS430-W |
30FT |
|
 |
4" Winch
Strap w/-38150 grab hook Working Load Limit:
5,400lbs
(2,454kgs)
B/S: 16,200lbs
(7,363gs) |
| Part No. |
Strap Length |
| WS416-G |
16FT |
| WS420-G |
20FT |
| WS425-G |
25FT |
| WS430-G |
30FT |
|
 |
4" Winch
Strap w/-6" loop Working Load Limit: 6,000lbs
(2,727kgs)
B/S: 18,000lbs
(8,181kgs) |
| Part No. |
Strap Length |
| WS416-L |
16FT |
| WS420-L |
20FT |
| WS425-L |
25FT |
| WS430-L |
30FT |
|
¡@
 |
- Custom stencilling available upon request.
- Contact your Customer Service Representative for more
details.
|
¡@ |
¡@
Strap Winder
|
92500
 |
Keep winch straps
organized with the strap winder! The web
winder is a must for any trucker who uses winch straps. The set
screw mount allows the unit to attach easily to any standard side rail
and conveniently disassemble for storage.
Use the strap winder to roll all of your winch straps
neatly and quickly so they are ready for use whenever you need them.
The strap winder will save you a fortune in time and extend the life of
your straps. |
¡@ |
¡@
¡@ |