[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Breaking Strength (B/S) = 3  X Working Load Limit (WLL) 

Alternate hardware available, see hardware section of catalogue

Webbing straps must be protected when used on rough or sharp objects.  Straps that are cut, worn or otherwise damaged should not be used.

A strap is only as strong as its weakest component.

B/S = breaking strength      

W.L.L. = Working Load Limit (1/3 of the breaking strength)

1" Webbing adjusters

18907 - 1" webbing adjuster, plastic	18908- 1" tri-glide buckle, plastic	18902-1- 1" webbing adjuster, metal

2" Webbing adjusters

18902- 2" webbing adjuster	18905- 2" loop	19201- 1-1/2" footman loop, nickel plated
	B/S: 5,000lbs (2,272kgs)	center hole to center: 2-5/8", hole I.D: 7/32"

18904 -  2" roller buckle	18901 - 2" slide buckle	18900- 2" slide buckle with sheet metal
	B/S: 4,000lbs (1,818kgs)	B/S: 1,000lbs (454kgs)

[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Send mail to info@tiedown.ca with questions or comments about this web site.
Copyright © 2006 CTS Cargo Tie-Down Specialty Inc.
Last modified: 04/22/10