============== CTS is your Cargo Securement Specialist ==================

[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Breaking Strength (B/S) = 3  X Working Load Limit (WLL) 

Alternate hardware available, see hardware section of catalogue

Webbing straps must be protected when used on rough or sharp objects.  Straps that are cut, worn or otherwise damaged should not be used.

A strap is only as strong as its weakest component.

B/S = breaking strength     

W.L.L. = Working Load Limit (1/3 of the breaking strength)

Rings

18280 - 1" D ring	18281 - 1" D ring	18293 - 3" O ring B/S: 2,000lbs (909kgs)
B/S: 5,000lbs (2,270kgs)	B/S: 1,500lbs (681kgs)	18294 - 2" O ringB/S: 5,000lbs (2,270kgs)

18290 - 2" D ring	18291 - 2" D ring	18515 - 5/8" pear link
B/S: 5,000bs (2,272kgs)	B/S: 4,800lbs (2,181kgs)	B/S: 14,100lbs (6,400kgs)

18512 - 2" delta ring	18512-1 - 2" delta ring	18513 - 3" delta ring
B/S: 10,000bs (4,545kgs)	B/S: 10,000 (4,545kgs)	B/S: 18,000lbs (8,182kgs)

18514 - 4" delta ring	18905 - 2" loop, zinc plated	18517 - 2" flat delta ring
B/S: 20,000bs (9,090kgs)	B/S: 5,000bs (2,272kgs)	B/S: 15,000bs (6,800kgs)

[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Send mail to info@tiedown.ca with questions or comments about this web site.
Copyright © 2006 CTS Cargo Tie-Down Specialty Inc.
Last modified: 03/08/08