[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Breaking Strength (B/S) = 3  X Working Load Limit (WLL) 

Alternate hardware available, see hardware section of catalogue

Webbing straps must be protected when used on rough or sharp objects.  Straps that are cut, worn or otherwise damaged should not be used.

A strap is only as strong as its weakest component.

B/S = breaking strength      

W.L.L. = Working Load Limit (1/3 of the breaking strength)

1" Overcenter Buckles

81100 - 1" overcenter buckle	81130 - 1" overcenter buckle
B/S: 1,000lbs (454kgs)	B/S: 3,000lbs (1,363kgs)

1-3/4" Overcenter Buckles

80101 - 1-3/4" overcenter buckle	80100- 1-3/4" overcenter buckle, stainless steel
B/S: 5,000lbs (2,272kgs)	B/S: 3,000lbs (1363kgs)

2" Overcenter Buckles

80900 - 2" overcenter buckle	80933 - 2" overcenter buckle	80944 - 2" overcenter buckle
B/S: 1,760lbs (800kgs)	B/S: 3,300lbs (1500kgs)	B/S: 4,400lbs (2000kgs)

80918 - 2" overcenter buckle	80901 - 2" quick release buckle
B/S: 1,800lbs (818kgs)

[ Ratchet Buckles ] [ Cam Buckles ] [ Overcenter Buckles ] [ Webbing Adjusters ] [ Hooks ] [ Chain Anchors ] [ Track End Fittings ] [ Rings ]

Send mail to info@tiedown.ca with questions or comments about this web site.
Copyright © 2006 CTS Cargo Tie-Down Specialty Inc.
Last modified: 04/22/10