|
[ Logistic Tracks ] [ Logistic Straps ] [ Cargo Bars ] [ Moving Pads ] [ Accessories ]
¡@
Breaking Strength (B/S) = 3 X Working
Load Limit (WLL)
Alternate hardware available, see hardware
section of catalogue
Webbing straps must be protected when used
on rough or sharp objects. Straps that are cut, worn or otherwise damaged
should not be used.
A strap is only as strong as its weakest
component.
¡@
| |
Logistic Tracks
 |
12510 - E-Track, horizontal, 10 ft. long
E-Track can be installed onto the wall or floor of any
trailer with ordinary screws. Use them with logistic straps or
decking beams to secure cargo and separate loads. Track placed on
the floor can be used for load securement or hauling automobiles.
Finished: Zinc plated steel
Minimum Yield: 50,000psi |
 |
12710 - Combination
Track, E & F (1" hole), horizontal, 10 ft. long,
Combination Track made of 12 gauge galvanized steel,
is designed to accept 1" F fitting or E fitting, shoring bars with 1"
round plug or decking beam. This track may be installed with
screws or rivets.
Finished: Zinc plated steel
Minimum Yield: 50,000psi |
 |
12610 - E-Track, vertical, 10 ft. long
E-Track can be installed onto the wall or floor of any
trailer with ordinary screws. Use them with logistic straps or
decking beams to secure cargo and separate loads. Track placed on
the floor can be used for load securement or hauling automobiles.
Finished: Green powder coated steel
Minimum Yield: 50,000psi |
¡@
 |
14310 - F-Track with 1" round hole,
horizontal, 10 ft. long
1" round hole F-Track made of 16 gauge galvanized
steel, is designed to accept F end fitting, shoring bars with 1" plug.
This track may be installed with screws or rivets.
Finished: Galvanized steel
Minimum Yield: 50,000psi |
¡@
 |
14510 - L-Track with 1" notch hole, horizontal, 10
ft. long
1" Notch hole L-Track made of 12 gauge galvanized
steel, is designed to accept L end fitting, shoring bars with 1" plug.
This track may be installed with screws or rivets.
Finished: Galvanized steel
Minimum Yield: 43,000psi |
¡@
 |
19053-6 -
Aluminum Track , 6 Inch long
19053-48 -
Aluminum Track , 48 Inch long
Working Load Limit: 500lbs (227kgs)
*19050 single stud sold separately.
¡@ |
¡@
Caution: Welding
galvanized material may form toxic fumes. Welding should be done with
adequate ventilation areas only.
¡@
¡@
¡@
| |
¡@
|
