|
|
|
Chain binders' failure can lead to catastrophic accidents on the road and is the nightmare of many transport drivers. Chain binders is probably the most critical component of a cargo secure system; without it no tension can be created on the lines which secures the cargo to the flatbed and it is also the one that is most affected by vehicle vibration. If you think about it, since tensioning requires a bit of balance to secure the cargo and to make the removal of the secure system eventually. In this condition, there is only a small margin of pressure that is needed either to secure the system or open it. That's why much thought must be invested in the design and construction of the lock component of the secure system.
Chain binders from CTS Cargo Tie-Down Specialty Inc. satisfy all the requirements for safety and reliability. The chain binders are designed so that only a small force is needed to make the binder produce the tension needed to secure the cargo and conversely, the binding system also needs only a slight force to unravel the secure system. What CTS has done is to improve the strength and durability of these chain binders, not by making them heavier, but by engineering the material whose form endows it with the strength needed to put tension on the chains. As an additional safety measure, CTS also designed a simple binder lock, whose lock is activated from the tension formed in the chains and locking lever of the binder. An extremely beautiful piece of engineering, it is the form of the lock that gives its locking function and it is the tension in the chain that keeps the form on the lock. That is the kind of engineering you can expect in each and every product produced by CTS Cargo Tie-Down Specialties, Inc. — everything is mechanically simple that allows it to keep the costs of its devices down while improving the reliability and durability of the devices.
While you are looking for chain binders, browse through all of CTS Cargo Tie-Down Specialty Inc.'s line of cargo secure products and you'll be surprised to find that you are interested in many of them. Like the ratchet tie-downs as well as the winch straps. It's because CTS designed its products to work with one another, either as a supplementary cargo secure system or as an enhancement of an existing cargo secure system, especially when one has to contend with a load that is not uniform — like those in construction where flatbeds are daily made to carry rebar, cement, pipes and ducting and tools. These dense materials need something better than nylon webbing to secure them, especially when they are piled high on the flatbed truck. These binders act to place tension in the chains, whose capacity to hold tension is low, thus making them poor securing materials. The binders on the other hand, are similar in material to securing chains but whose ability to provide tension is a function of the fulcrums and lever mechanisms in it. This means that cargo can now be taken safely from site to site, thanks to the tensioning ability of the binders. And only CTS Cargo Tie-Down Specialty Inc. can provide you with competitively priced binders whose functionality is not compromised.
|
